Alchitry Br V2 Style:Standard

Alchitry Br V2 Style:StandardCheck out the all new Br V2! If you're looking for the original Br available now, head over to SparkFun. This board breaks out all the signal pins on the Alchitry headers to 0. 1" easy to solder holes. Because the stack height on the new boards is only 4mm, the wide version is recommended for most uses so you don't need to worry about how far solder joints hang below the board. The holes above the USB port have very little clearance underneath.

8V) pins (16 pairs) capable of LVDS_25 IO

44 pins are routed as 100 ohm differential pairs (includes 18 triple voltage pins)

This requires that the mating board is clear of components under the Pt

5V @ 500mA (triple voltage pins

QWIIC connector (shares pins on bank B)

2 on QWIIC connector

3V @ 3A (IO)

XC7A100T-2FGG84I FPGA

The board haves a 5V boost converter and 5V<->3

1V @ 4A (VCCINT)

Click here for instructions on installing it

206 IO pins All IO pairs are LVDS_25 capable inputs or TMDS_33 capable IO