Wilger Flow Indicator - Standard Flow Spray Gun

Wilger Flow Indicator - Standard Flow Spray GunFlow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating ball in the indicator body will show if a tip is performing as it should. When operating, the indicator ball will float towards the upper middle section. If a ball is floating lower than those in the other indicators, there is lack of flow due to a blockage in the system. When a ball is floating higher, there is excess flow due

four replacement o-rings (1101

Camlock fitting

Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

6 bar) pressure drop at 6 gpm (37

Spacing between the disc is 12"

This regulator is rated for 560 PSI and 26 GPM

The standard 6010

The Green Garde JD9 trigger adjust spray gun is similar to the standard JD9-C

The remount mount regulator kit from Udor

Maximum pressure is 150 PSI

The valve seat is one of the first wear items

Teejet Lawn Gun nozzles can be seen on their product page by clicking here