Bando TL1310 7/8 TL BORE 7/8 (.875) Tapes

Bando TL1310 7/8 TL BORE 7/8 (.875) TapesBando TL1310 7 8 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code H Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3734M Mounting Arrangement F1 Number of Poles 4 Overall Length 22

Start Configuration DOL Break-Down Torque 330 LB-FT Pull-Up Torque 142 LB-FT Locked-Rotor Torque 178 LB-FT Starting Current 270 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

67 % Rated voltage 400 V Rated current 19

Standard NEMA MG-1 Frequency 60 Hz Voltage 200/400 V Number of poles 2 Degree of Protection IP23 Synchronous speed 3600 rpm Output rating 40 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors

Catalog Number ZDVSCP4110T Enclosure TEFC Frame 324T Frame Material Iron Frequency 60

VEBM3211T SPEC

D XP Division Division II Agency Approvals UR CCSA US Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 30-60 Current @ Voltage 213

Amperes 276/159 A LRC 7

127 mm Fan material Bronze Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Connection Cables Quantity 3 Downloads

511 Line Amps 19

30 Inches Static Pressure: CFM = 5280

0 V @ 50 HZ XP Class and Group None XP Division Not Applicable Agency Approvals IE3 UR WEEE CSA CE Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 4