Socket Head Cap Screw Stainless Steel 3/4-10 * 7" [Cup Point] [Allen Drive] thread_size_5-8-18

Socket Head Cap Screw Stainless Steel 3/4-10 * 7" [Cup Point] [Allen Drive] thread_size_5-8-18These screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Length is measured from under the head. The screw has a length of 7" and a thread of 3 4 10. Coarse threads are the industry standard: choose these screws if you dont know the pitch or threads per inch.

This plow bolt has a length of 4-1/2" with a threading of 1-8 [Partially Threaded]

Create your own lifting eye by adding an eye nut to a stud or bolt

The rod has a thread of 3/8-16 and a length of 36"

This hexagonal bolt has a length of 7" with a threading of 1-1/4-12 [Partially Threaded]

This rod is 36" long and has a 10-32 thread

The screw has a length of 8" and a thread of 9/16-12

these screws have good chemical resistance and may be mildly magnetic

This hexagonal nut fit a threading of 1-1/2-12

This hexagonal bolt has a length of 3-1/2" with a threading of 3/4-16 [Partially Threaded]

The screw has a length of 1-1/4" and a thread of 1-8

This hexagonal bolt has a length of 8" with a threading of 7/8-14 [Partially Threaded]

the base expands as you tighten the nut for a secure hold in concrete