FOX FLOAT DPS Factory Rear Shock - Standard 7.875 x 2" EVOL SV 3-Position Lever Kashima Coat CheckoutTitle=Teravail Superlight Tube - 29 x 2 - 2.4

FOX FLOAT DPS Factory Rear Shock - Standard 7.875 x 2" EVOL SV 3-Position Lever Kashima Coat CheckoutTitle=Teravail Superlight Tube - 29 x 2 - 2.4FOX FLOAT DPS Factory Rear Shock Standard 7. 875 x 2" EVOL SV 3 Position Lever Kashima Coat. For a lightweight inline shock the FLOAT DPS packs a lot of performance. The Dual Piston Base Valve has dedicated compression and rebound pistons providing a firm lockout without compromising bump compliance ride control or efficiency. Genuine Kashima Coat on air sleeve and body Lightweight one piece EVOL air sleeve improves responsiveness and sensitivity Dual

}Teravail Protection Tube - 16 x 1

model Black Oxide description bearing (42mm) 45x45 degree size 1-1/8" package each

Washer & Bolt Cable Clamp: The cable is securely and safely secured to the lever now by a washer and bolt which limits the cable damage you would see from a grub screw

5 Fork Type Not Included

King in-house made bearings use surgical steel races machined at the same time to ensure a perfectly matched inner and outer race

SRAM OE pads for no-compromise disc brake performance

The CCP-22 is a purpose-built tool for removing crank arms from bicycles with three-piece cranks that use an M8 crank bolt including common square tapered cranks SRAM PowerSpline cranks FSA Power Drive cranks and BNI cranks on Bosch e-bike systems

Set up for 197mm thru axle with Shimano 9/10 freehub body installed

}SRAM GX Eagle SuperBoost+ Crankset - 165mm 12-Speed 32t Direct Mount DUB Spindle Interface Lunar 56

Bar sweeps forward then back to preserve stem length

0” 29 x 3

The ARC1100 feature a new 180 Dicut Aero hubs as well as new Aero Lite II and Aero Comp II spokes for ultimate performance gains