Bando TL50-S8M-25 STS TL Timing Belt Pulley (2012) Submersible ElevatorBando TL50 S8M 25 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 6 AWG Motor Type 4256M Mounting Arrangement F1 Number of Poles 4 Overall Length 27
Bando - RPF4680 Molded notch design gives extra flexibility to reduce heat build-up and provide long belt life
8x(Code G) No load current 68
25 MOUNTING STUD/BAND MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 70 ROTATION CCW LEAD END REV SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 370 SHIPPING WEIGHT 14 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 22
75 MOTOR TYPE FHP AMBIENT 40 ROTATION REVERSIBLE SERVICE FACTOR 1 RUNCAPMFD 10 RUNCAPVOLTS 370 SHIPPING WEIGHT 18 BREAKDOWN TORQUE 92
125 HP - OPEN - 1090 PHASETYPE 1_PERMANENT SPLIT CA MOTOR ENCLOSURE OPEN HORSEPOWER
DiversitechWG840589
CODE T3C ABMA DE BRG 30BC02X30X ABMA ODE BRG 30BC02X30X GREASE POLYREX EM MOTOR WEIGHT 132 MAX
50 % Rated voltage 380 V Rated current 647 A L
1 POLES 2 NUMBER SPEEDS 1 RPM 3450 HERTZ 60 VOLTS PRIMARY 115/208-230 VOLTS 115 VOLTS 2 208 VOLTS 3 230 FRME 56 SHAFT CODE HC STATOR DIAMETER 6
14 A LRC 4
98 LB-FT Pull-Up Torque 0
