Nitrogen Stem - Type 50 Regulator Stem & Nut for NZ/AU Nitrogen Cylinders & Regulators nitrogen

Nitrogen Stem - Type 50 Regulator Stem & Nut for NZ/AU Nitrogen Cylinders & Regulators nitrogenNitrogen Stem & Nut Type 50 for NZ AU Nitrogen Cylinders & Regulators Nitrogen Regulator Stem Use your co2 reg as a nitro or mixed gas reg. Replace the stem with this one. This stem will allow the use of Type 50 valve threaded tanks which in NZ is typically Nitrogen or Beer Gas mix or cellar mix gasses for nitro beers. Please make sure your regulator is suitable for nitrogen before using it. MK3, MK4, MKIII regulators are all ok to use with nitrogen.

dry hop with at least 30g (up to 200g) of American

Kegs come with a flat stainless screw top as standard

It has a fresh

So when the SodaStream Filler arrives

MEATER Sense™: 2 temperature sensors in 1 probe

Use pure N2 bulbs for making Espresso Martini or Nitro Cold Brew Coffee (or any nitro drink)

You will need to have the Sodastream and Remote gas line package to set it up as shown in the images with the line between the keg and regulator

*The other pictures show usage and gas options

height : 600mm

To use with a 19L corny keg it is best to purchase a stainless steel gas disconnect » so that the sodastream bottle hangs vertically and for the same reason the plastic disconnect works better with the mini kegs (as you can see in the product pictures)

5L and 19L "cornie" kegs

1M3 (1 cubic meter of compressed nitrogen) enough to push around 4-5x 20L kegs