Trussrod Aluminium Channel For Bass, 579mm length GraphTech TUSQ Saddles

Trussrod Aluminium Channel For Bass, 579mm length GraphTech TUSQ SaddlesTrussrod with Aluminium U Channel for Bass Guitars 579mm length (this measurement includes the length of the adjusting nut, of which measures 30mm long by itself). These trussrods are adjusted with a 5mm allen key (not included). Aluminium U channel has a 5mm steel rod inside. 579mm length, 11mm width x 9mm height

Mounting Screw Hole Location = 6 O'clock low

Block length varies for different thickness instruments and cavity size requirements

Humbucker mount screws

Fret Marker = Black Dot

6 screw mounting

This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side)

with 3mm pearl dot inlays

This design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs

Includes: Kluson embossed stamped steel saddles and a machined solid steel sustain block

High density- to ensure a very high tone transfer

Tone Ninja guitar nut in an off-white finish

Zinc baseplate with brass saddles