Bando 4430V740 Power Max Variable Speed Pump Motors

Bando 4430V740 Power Max Variable Speed Pump MotorsBando 4430V740 Power Max Variable Speed Belts extreme crosswise rigidity As Power Max belts are wide in proportion to their thickness, they must have extreme crosswise rigidity to keep them from dishing in. This dishing would cause the tensile cords to become misaligned, leading to uneven speed control and excessive wear on the cords, causing premature failure. Power Max belts provide lengthwise flexibility to bend around small sheave diameters

EFM3709T SPEC

Nordyne01-0170

Bando - P64-5M-15 The type of pulley used on a Synchro-Link® drive depends on a number of factors

04 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 53

US100 Standard Catalog IEC

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1175 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

Bando - 7PK2380 Trusted by the world's Top Automakers

15 SHIPPING WEIGHT 42 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE UOM OZFT KVA CODE LETTER A NEMA NOMINAL EFFICIENCY 81

5 a Frame Prefix D Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement B5 Number of Poles 2 Overall Length 12

75 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1440 rpm Slip 4

0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 4040M Mounting Arrangement F1 Number of Poles 2 Overall Length 22

0 A Rated torque 267 ft