Bando 100-S3M-516UK S3M-516 Poly Timing Belt 3 BladeBando 100 S3M 516UK Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,
4 a Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready IP Rating NONE KVA Code F Lifting Lugs Standard Lifting Lugs Max Speed 4500 rpm Motor Lead Quantity/Wire Size 3 @ 4 AWG Motor Type A36068M Mounting Arrangement F1 Number of Poles 2 Overall Length 31
5 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Type 0632M Mounting Arrangement F1 Number of Poles 4 Overall Length 17
Frame 254/6T Output 20 HP (15 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3525 rpm Slip 2
Catalog Number IDVSNM3534 Enclosure TENV Frame 56C Frame Material Steel Frequency 60
SHUNT Frame Prefix C Heater Indicator No Heater Insulation Class F Lifting Lugs Standard Lifting Lugs Mounting Arrangement F2 Overall Length 68
4 LB-FT Locked-Rotor Torque 99 LB-FT Starting Current 350 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Coil reference Of the electronic module d/c 4P Application Contactor CWM32/40 Control voltage 110-130VDC Terminal type Fixing terminal with screw Attributes
Rated current 250 A Supply voltage 4160 V Frequency 60 Hz Enclosure rating NEMA 3R Control options E-Stop pushbutton
3 POLES 4 NUMBER SPEEDS 1 RPM 1780 RPM 2 1780 RPM 3 1770 RPM 4 1480 RPM 5 1480 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 326 SHAFT CODE TS MOUNTING HORZ-FOOTED MOTOR TYPE FD OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
Robertshaw41-408
141 Ohms A Ph / 0 Ohms B Ph Temp
Fasco7173-0243
