Holley - Inlet Needle Steel Seat Size 0.130" Adjustable

Holley - Inlet Needle Steel Seat Size 0.130" Adjustable"Steel tipped" inlet needles are necessary when using exotic racing fuels. A . 097" seat size should be used for small four barrel carburetors; a . 110" seat size should be used for carburetors up to 735 CFM; larger seat sizes should be used with carburetors 750 CFM and larger. The following steel inlet needle and seat assemblies are available from Holley.

Fuel Cell and Pump - Stealth - 44 x 21 x 12 in Tall - 10 AN O-Ring Outlet - Clamps / Fuel Pump / Fittings - 100 gph - 380 lph at 70 psi - Ford Mustang 1986-95 - Kit

Rivet - Multi-Grip - 9/16 in Head - 3/16 in Steel Mandrel - 1/16-3/8 in Grip Range - Aluminum - White Paint - Set of 250

AN Hose Assembly - 10 in Long - 3 AN Hose - 3 AN Straight Female to 3 AN 90 Degree Female - Braided Stainless - PTFE Lined - Each

860 in Round Port - Steel Core Laminate - GM LS-Series - Each

Rivet - Small - 3/8 in Head - 3/16 in Steel Mandrel - 5/8 to 3/4 in Grip Range - Aluminum - White Paint - Set of 250

625 in Bolt Circle - Iron - Gold Paint - GM LS-Series - Each

The high-back collar

2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT)

Wire - 14 Gauge - 100 ft Roll - Plastic Insulation - Copper - Black - Each

46 in Extended - Linear - Steel - Yellow Paint - Front - GM G-Body 1973-88 - Each

Car Wiring Harness - Classic Update - Complete - Chevy 1947-55 - Kit

5 in ID - 16 in Length - 200 lb/in Spring Rate - Steel - Silver Powder Coat - Each