Bando TL36-S14M-60 STS TL Timing Belt Pulley (3020) Synchro-Link Double Sided Polyurethane (RMA)Bando TL36 S14M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA EEV UR CSA CE Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 20
15 STARTCAPMFD N\A SHIPPING WEIGHT 60 BREAKDOWN TORQUE 282 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 235 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER H LOCKED ROTOR AMPS 63 NEMA NOMINAL EFFICIENCY 88
04 IN Power Factor 60 Product Family Wash Down Pulley Face Code Standard Rodent Screen None Service Factor 1
9x(Code G) No load current 12
CODE T3C ABMA DE BRG 35BC03X30X ABMA ODE BRG 35BC03X30X GREASE POLYREX EM MOTOR WEIGHT 231 MAX
EHM3154T SPEC
lb Locked rotor torque 240 % Breakdown torque 260 % Locked rotor time 25s (cold) 14s (hot) Moment of inertia (J) 9
Bando - 148XL075G The extra durable
lb Locked rotor torque 250 % Breakdown torque 270 % Locked rotor time 61s (cold) 34s (hot) Moment of inertia (J) 3
1 POLES 4 NUMBER SPEEDS 1 RPM 1790 RPM 4 1485 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 460 VOLTS 460 VOLTS 4 400 FRME 447 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING 6313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
37H882T381G1 HP 15 VOLTS 230/460 AMP 33
35E4717G184G1 HP 1 VOLTS 230/460 AMP 3
