Roof Opensky Hinged Base External Dimensons 1740X1490mm (1.5m2 Vent Only) LDGRILL500X1800

Roof Opensky Hinged Base External Dimensons 1740X1490mm (1.5m2 Vent Only) LDGRILL500X1800Hinged Mounting Base for Opensky Louvred AOV The Hinged Mounting Base is designed for use with the Opensky Louvred AOV, providing both smoke ventilation and convenient roof access. Upstand Compatibility: Suitable for a 150mm thick upstand Throat Size: 1410mm x 890mm (for 1. 5m Geometric Free Area Vent) External Dimensions: 1740mm X 1490mm Material: Uninsulated Aluminium Feature: Hinged design for roof access **Please note: A vent base is required to

Enhances automated window safety and performance

The unit is small enough to be added to other third-party devices thereby allowing a range of equipment to be added to the ESP loop

and operational limits (model dependent)

Reduces risk of misalignment during installation

Base Mounting Adapter: Compatible with the majority of existing Analogue and Conventional bases

● 24 V dc

The Heater shall have an integrated temperature controller allowing set point adjustment between 0 and 30°C with supply air temperature sensor supplied for mounting within the ductwork

The element is manufactured with state-of-the art technology with a ceramic beam onto which thick-film resistors have been applied

For all doors

Quiescent current 460µA @ 27 to 40V DC (typical)

Introducing the ACD-EN

Model YBN-R/3(SCI) is a sensor mounting base featuring an integral short-circuit isolator which will detect and isolate short-circuits on the loop