17-11: New Laboratory of the Cooling Tower Research in the Czech Republic History of Cooling Towers

17-11: New Laboratory of the Cooling Tower Research in the Czech Republic History of Cooling TowersThis year we are starting to build the new laboratory for the cooling tower research. Its location is in the central Europe near the capital city of Czech Republic Prague. The new laboratory consists of hall laboratory and exterior experimental facilities. In the new laboratory is the experimental test cell for drift eliminator testing. This facility can be used for fill measurement also. Experimental cells for dry and wet cooling towers are placed on

water is becoming recognized as one of our most precious and important natural resources

is highly effective in controlling the growth of algae in cooling water

This paper discusses a control scheme by which real time motor temperature data is used to insure maximum output while simultaneously protecting the motor from an overheating condition

makes it timely to review the fundamentals of cooling tower water operators

lower maintenance costs

This facility can be used for fill measurement also

and another replacement planned

and (5) Chemical Factors

The design criteria of NWD had been established by the experiment and a prototype NWD was installed to confirm the result of the experiment and no plume was visible at the fan stack exit

Baffles called drift eliminators are placed between the nozzles and the fan to minimize (through inertial impaction) the amount of entrained water droplets that are discharged into the atmosphere

This is a review of the types of monitors commercially available

and it will give a procedure to be used to compare the relative performance of the fills