Bando TL72-S8M-15 STS TL Timing Belt Pulley (2012) Shaft -Extensions - AdaptersBando TL72 S8M 15 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
20 IN Product Family General Purpose Pulley End Bearing Type Sealed Bearing Service Factor 1
EmersonF33JCS-3655
318 lb-ft2 Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Heater Indicator No Heater Insulation Class F Lifting Lugs No Lifting Lugs Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 18 AWG
UPC840899111063
39 Ohms A Ph / 0 Ohms B Ph Temp
weight³ 2306 lb Efficiency
07 IN Power Factor 88 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen Included Service Factor 1
5 A Rated torque 473 ft
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 10 AWG Motor Type 1048M Mounting Arrangement F1 Number of Poles 2 Overall Length 26
Pull-Up Torque 156 LB-FT Locked-Rotor Torque 164 LB-FT Starting Current 141 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Bando - 11B158 To resolve problem applications where belts are flipping over or jumping out of the sheaves
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3530 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
