Vertical Pull Winch Support for PCH2000 PCW4000

Vertical Pull Winch Support for PCH2000 PCW4000DESCRIPTION This winch support is expressly designed for vertical pulling with our winch PCH2000. If you want to use the winches PCH1000 or PCT1800, you will need to use the support PCA 1264. It is equipped with an adjustable shelf and offers a solid and stable support allowing the winch to be properly seated. It also has a removable "V" shaped pulley mounted on ball bearings, providing optimum rotation. This pulley redirects the rope vertically at an

We invite you to consult the local regulations for this purpose

85 kg Ø rope up to 10 mm Ø rope up to 13 mm Single pulleys Double pulley Single pulley Double pulley All aluminium Stainless steel side plates and aluminium sheaves Ø sheave 62 mm Ø sheave 76 mm Ø sheave 100 mm MBS 50 kN (5

but its diameter can be too large for certain PRO‑series winches that require a fourth wrap on the drum to reach full pulling power

Material: Durable nylon

*Note: the PCS cannot be installed on other pulling winches mainly because the other models don't have a centrifugal clutch and that the PCS acts as the throttle on the PCW4000

The Almighty

7 lb)  PCA-1203M - 100 m (328 ft)  -  Weight: 7 kg (15

Rechargeable to full capacity at any time

360° inclinable and air-cooled

Note that when used for horizontal pulling

The PCA-3300 brings together the essential accessories required to put your winch to work right out of the box

7 mm in diameter