Baldor ECS100T8H2DF4 2HP, 1800RPM, 3PH, 60HZ, 145T, TEFC, TOP TRANSMISSION AND DISTRIBUTION

Baldor ECS100T8H2DF4 2HP, 1800RPM, 3PH, 60HZ, 145T, TEFC, TOP TRANSMISSION AND DISTRIBUTIONSpecs Feedback Device NO FEEDBACK Heater Indicator No Heater Inverter Code Inverter Duty IP Rating NONE Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity Wire Size 3 @ 16 AWG Motor Type 3520B Mounting Arrangement F1 Number of Poles 4 Overall Length 12. 37 IN Product Family General Purpose Pulley Face Code Standard Rodent Screen None RoHS Status ROHS COMPLIANT Shaft Diameter 0.

9x(Code K) No load current 10

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP55 KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 10 AWG Motor Type 1072M Mounting Arrangement F1 Number of Poles 4 Overall Length 28

Model_Number FF53 PRODUCT NAME 7

00 % Rated voltage 400 V Rated current 11

762 Line Amps 2

Model_Number DC95 PRODUCT NAME 100 HP - DP - 1785 PHASETYPE 3_PHASE MOTOR ENCLOSURE DP HORSEPOWER 100 KILOWATTS 74

Reference MPW40 Maximum rated current Ie 40 A Setting range for thermal release 20-25 A Number of poles 3 Short-circuit release 13 x Iemax Rated operational voltage Ue 690 V Rated operational frequency 50/60 Hz Rated insulation voltage Ui 690 V Rated impulse withstand voltage Uimp 6 kV Utilization category - IEC60947-2 (motor starter protector/circuit breaker) A Utilization category - IEC60947-4-1 (Motor Starters) AC-3 Trip test Yes Overload protection Yes Phase failure sensitivity Yes Trip indication Yes Tripping class 10 Maximum operating frequency (ops

Load 85° C Start Configuration DOL Break-Down Torque 336 LB-FT Pull-Up Torque 132 LB-FT Locked-Rotor Torque 173 LB-FT Starting Current 267 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Type Kit Applied product CFW11 CFW11M CFW500 Description HMI Complement HMI-01 Application Variable speed drive Certification UL

8 POLES 2 NUMBER SPEEDS 1 RPM 3545 RPM 2 3545 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 324 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE LCE OPPOSITE END BEARING 6211-J/C3 SHAFT END BEARING 6311-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1 STARTCAPMFD N\A SHIPPING WEIGHT 550 BREAKDOWN TORQUE 236 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 189 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 288

3 A Rated torque 44

14 Ohms A Ph / 32